• aditya mehrotra.

chip updates: ssh'ing into the Jetson TX1 [updates]

So we're going to do one last thing today. Try to SSH into the Jetson TX1 and install some things like MAVROS. So the first thing we did, was get a really really long HDMI cable (just so we could get the IP address).



So now we know the IP address is 192.168.1.24 for this specific day. So we're going to go to our MAC TERMINAL and type ssh robotics-core@192.168.1.24 - the password is 0000!


And we're in! Just need to make sure both computers are on the same network. Now if we don't turn off the Jetson, we can use it from SSH with this IP every time. If we turn it off we'll need to find the IP again.


#ssh #updates #controller

3 views0 comments
© copyright 2019 | aditya mehrotra